| Temperature Control Range: | 25ºC-37ºC |
|---|---|
| Temperature Rise Time: | ≤45mins |
| Mattress Tray Max. Load: | 10kg |
| Heat Output Indicate: | 0-100% in 10% |
| Transfusion Pole Max. Load: | 2kg |
| Temperature Sensor Accuracy: | ≤0.3ºC |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
STANDARD COMPOSITION:
Microcontroller control open type radiant warmer with manual and servo system
Display skin set facility, skin observed temperature in ºC and heat power separately
User friendly soft touch panel large and bright LED Display
Ceramic infrared heating element for effective warming
Audible and visual alarm facility for overheating beyond set temperature range,
probe failure, power failure, system failure and heater failure
Warmer will be sense the skin probe failure and cut off the heater
Warmer head will rotate and swivel in different direction
Inbuilt battery back- up during power failure
Keyboard locking facility to avoid unwanted user modification of the set parameter.
Height of the warmer will adjustable
Control panel will liquid proof and allow easy and hygienic disinfection
Intelligent alarms for patient safety
Large mattress, drop down side panels for easy access to new-born
Examination lamps for easy observation of new-born
TECHNICAL SPECIFICATIONS:
Observation Light : 1000 Lux
Color Temperature range : 3700k to 5100k
Patient control ( baby mode ) : 34°C to 37.5°C in increments 0.1°C ( 95°F to 99.5°F )
Manual mode adjust heater output : 10 - 100% with 5% increment, auditory and visual alarm will give every 15 min.
Temperature measurement accuracy: ± 0.3°C, resolution: ± 0.1°C, probe accuracy: ± 0.1°C
Warmer have with bassinet trolley. Mattress foam density 25kg/cm³, transparent collapsible side wall, easy detachable for cleaning, mattress size : 20" x 28 "
Size of drop down 5" (±1" ) mattress surface, 6mm thick, clear and transparent.
Bed height about 80 ~ 100cm from the floor and 80 ~ 90cm from the heat source.
The baby bed is crevice free for ease of cleaning, infection control and mattress used to be
biocompatible material.
Heater Element : 600 watts
Heater will cut off , if the maximum irradiance at any point of the mattress area exceeds a total irradiance level of 10mw/cm² or above 60% of the heater output ( between 10 to 30 min)
Bed tilt mechanism : -10-15°
Skin temperature probe size : ≤ 10mm dia 3~ 4mm thick ( biocompatible), pliable probe wire and non-stiff
Castor wheels 2 are lockable
Ambient temperature : 10-40°C
Relative Humidity : 15 - 90%
Power supply : 220-240VAC, 50Hz
ACCESSORIES:
1.Mattress-1 No.
2.IV pole-1 No.
3.Skin Probe-1 No.
4.X-ray cassette tray-1 No
5.Operational and service manual - 1 set each
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}