| Customization: | Available |
|---|---|
| Type: | Electric Bed |
| Certification: | ISO13485 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. General Description:
This bed is designed for women's parturition and gynecological operation. Leg section of the parturition bed can be disassembled Various movement of the bedis controlled by human, Body posture is adjusted by mechanical drive organization. It can be raised or lowered hydraulically by means of an oil pump. This productis operate by human, can meet the demand of gynecology diagnoses, examination, surgery, body position of the parturient woman.
According to the matter, there are two types: model PLGYN-06 and JHC-06C.The outer hulls of the model 06C are ordinary carbon steel, the other are stainlesssteel. The technical parameters and devices are same.
2. Specification:
|
Length/Width |
2000mm/600mm |
|
Height |
620mm-860mm |
|
Trendelenburg/Revers Trendelenburg |
≥20°/≥20° |
|
Back Section Up /Down |
≥65°/≥10° |
|
Load Capacity |
250kg |
3. Accessories:
1.Stand for anesthetic and for hanging intravenous drip bottle 1 set :
Used for isolating the operating area during operation and can be used for hanging intravenous drip. Its height can be adjusted.
2. Shoulder rest and mattress 2 set :
Mounted on each side of the bed and covered with sponge mattress, soft and comfortable. It supports the shoulder of the lying-in woman so as to prevent herbody from moving backward. The distance between the two shoulder rests can be adjusted according to the width of shoulder.
3. Arm rest and mattress 2 set :
Covered with sponge mattress, can be mounted on either side of the bed and used for intravenous drip and for measurement of blood pressure and pulse. It issoft and comfortable.
4. Handle 2 set :
Provide a woman in labour to pull.
5. Leg support, foot board and mattress 2 set :
There is one on each side, support the pregnant women or the patient legs, it also can be used for the pregnant women who kick with heel hardly in horizontaldelivery. In order to adapt to the different maternal height, you can adjust its position if it is necessary.
6. Mattress on the table top 1 set :
It includes three parts. It is made of sponge covered with imitation leather. Soft and comfortable, easy to use.
7. The contaminative basin can prevent the amniotic fluid leaks, it is easy to assemble and disassemble
8. Operation Instruction:
1) Operation of the oil pump:
Both the ascending and descending movements of the table top are controlled by the oil pump. When the products leave the factory, the oil pump has beeniumped into the pail, so the oil pump can not ascend. The Consumers must move the cover of the filing aperture at the fop of the oil pump. Use a funnel to refill the»il pump slowly. By pressing down Pedal repeatedly, the table top will begin to descend slowly and gently. Until the table top can be elevated to its highest position.
lttention: Please infuse all the oil of barrel. Otherwise, the phenomenon that the tabletop can't be reached the maximum height may happen.
The moving and stabilization of the base: by loosening Handle of the base clockwise, the table can move. On the contrary, it can
be stabilized. Attention: Donot loosen or tighten a handle, otherwise, the phenomenon that the base is not stable may happen.
2) Bending of the table top:
The Back section bending upward and downward and Reversed Trendelenburg and Trendelenburg of the table-top are controlled by a pair of hand wheels onach side of the table. It can be operated easily.
Leg section disassembly: Unscrew the two fixed knobs below leg section, the leg section can be removed out. It must tighten the fixed knob when plugging into legsection, beware of operation slide.
9. Cleaning, disinfection and sterilization
1. Washing the parturition bed with water is prohibited.
2. Clean parturition bed with a soft cloth, sponge, wet cloth or detergent. Not use a hard brush, steel wire brush,
decontamination powder, paint, ether, bananaswater, acid-base solution to any surface.
3. Mattress must be disinfection with alcohol, ether, ultraviolet disinfection and so on (abandoning high-temperature
disinfection).
We are a company aiming to make one stop shopping for our customers. We equiped hospital operation room with many kind of items like operating table, operating light, defibrillator, anesthesia etc.We listed some hospital dental room items basic items for your reference as below:
| operation room | anesthesia machine |
| ventilator | |
| operating lamp | |
| operation table | |
| Pendant | |
| medical drill and saw | |
| ECG | |
| patient monitor | |
| Defibrillator | |
| infusion pump | |
| Electrocoagulation | |
| oxygen generator | |
| electric suction device | |
| autoclave sterilizer |
){kind=link}