Medical Hospital Surgical Electrically Respirator Ventilator

• out Looking: Mobile
• Display: 10.4′′ LCD Display
• Peep: 0 ~ 1.0 Kpa
• Inspiratory Plateau: 0~1s
• Gas Requirement: Oxygen with a Pressure Ranging From 280~600kpa
• Imv Frequency: 1~20 Bpm
• Model NO.: YSAV70A
• Ambient Temperature: 10 ~ 40oc
• Transport Package: Wooden Case
• Specification: CE certificate
• Trademark: YSENMED
• Origin: China
• Production Capacity: 2 000 Sets/Year

Product Description

Medical Surgical Electrically Respirator Ventilator 

 

TECHNIQUES SPECIFICATIONS
Physical specifications
Display	10.4'' LCD Display
Mode:	pneumatically powered and electrically controlled system
Trolley:	Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions
Technical Specifications:
Gas requirement:	Medical oxygen and nitrous oxide with a pressure ranging from 280~600kpa
safety valve	<12.5 kPa
Respiratory Rate	1 ~ 99 bpm
Oxygen concentration output	21% ~ 100% adjustable
Maximum Minute ventilation	≥18L / min
modes of ventilation	A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL, SIGH, SPONT
Ventilator compliance	≤30 Ml/kPa
PEEP:	0 ~ 1.0 kPa
Ptr:	-10 ~ 10 hPa
IMV frequency:	1~20 bpm
I/E Ratio:	4:1~1:4, Has the inverse ratio ventilation
Tidal Volume	Setting Range: 50~1500ML     Display Range: 0~2000ml ;   resolution ratio: 10ml
Inspiratory Plateau:	0~1s
Maximum Safety Pressure	≤ 6.0kPa
Sigh:	one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point
Pressure limit range:	1.0~ 6.0kPa
Airway pressure alarm: Audible and visual and with yellow and red color indicating	Lower: 0.1 kPa ~ 6.0 kPa;   Upper: 0 ~ 5.0 kPa
	±0.2 kPa
Ventilation Volume alarm:	≥ 18L/ MIN
Power Supply Alarm	Ac/dc power supply are after failing to send out alarm immediately Alarm Time: keep >120s
The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.
Operating conditions
Ambient temperature:	10 ~ 40oC
Relative humidity:	no higher than 80 %
Atmospheric pressure:	860 hPa ~ 1060 hPa
Power requirement:	100-120 Vac, 50/60 Hz;
Attention: the AC power supply used for the anesthesia machine must be well     grounded.
Attention: the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993, an oxygen monitor complying with ISO 7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical Electrical Equipment Part II: Special Requirements for Safety and Basic Performance of Anesthesia System.
Storage
Ambient temperature:	-15oC ~ +50oC
Relative humidity:	no higher than 95 %
Atmospheric pressure:	86 kPa ~ 106 kPa.
	It should be stored in a room without corrosive gas and well ventilated
Package
packaging box	comply with the requirement of GB/T 15464
	Between the packaging box and product, soft material with appropriate thickness provided to prevent loosening and mutual friction during transportation
	Moisture protection and rain protection to ensure that product is protected from natural damage.
Safty & Alarm
Gas source pressure	Immediate alarm; "high level alarm" indicator flickers raising an audible alarm.
Airway Pressure Alarm	The airway pressure exceeds 15hpa. The maximum delay is no longer than 17s. The "high level alarm" indicator flickers raising an audible alarm.
Tidal Volume Alarm	Lower than 50ml, The alarm will be raised after one breathing cycle.
Ventilation Volume Alarm	Lower: 0~12L/Min;   Up: 18L/ Min
Battery Voltage Alarm	It alrms when the battery voltage is lower than 10.5V.
Power On Self Test	Self test before working, assure it's working normally.
STANDARD CONFIGURATIONS
QTY	NAME
1 set	Main unit
1 set	Oxygen tube
2 set	Silicone Mask
1 pc	Power line
4 pcs	Threaded pipe
2 pcs	Standard Pipe
1 set	Oxygen Reducer
1 set	Humidifier
1 pc	Battery
2 set	flow sensor
2 pcs	A leather bag ( Blue)
1 set	Tools with the machine
1 set	User Manual (English Version)

Related production:
YSAV50A Medical Surgical Electrically Respirator Ventilator 

 

The YSAV50A ventilator is an electrically controlled pneumatic ventilator integrating such functions as time, volume cycling, pressure limit, etc. It is mainly intended for providing ventilation support to a critically ill patient during the life threatening phase and ensuring the going-through of the dangerous period by the patient and smooth treatment of primary diseases for recovery. Also it provides an alternation in case of irreversible lesions in respiratory muscles or irreversible damage to upper airway to maintain the respiratory function of the patient, and also provides ventilation assistance for the patient during the recovery from a disease or operation.
ALL MANIN UNIT HAS PASS THE CE
The automatic conversion for standby power while AC power outage, keep working not less than 1 hour
TECHNIQUES SPECIFICATIONS
Physical specifications
Display	LED Display
Mode:	pneumatically powered and electrically controlled system
Trolley:	Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions
Technical Specifications:
Gas requirement:	Medical oxygen with a pressure ranging from 280~600kpa
safety valve	<12.5 kPa
Respiratory Rate	6~60 times/ min
Oxygen concentration output	<50%
minute volume	≥18L
modes of ventilation	A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL, SIGH
PEEP:	0.1 ~ 1.0 kPa
Ptr:	-4 ~ 10 hPa
IMV frequency:	1~12 bpm
I/E Ratio:	1:1.5; 1:2.0; 1:2.5; 1:3.0
Tidal Volume	Not less than 50~ 1200ml
Inspiratory Plateau:	0~1s
Maximum Safety Pressure	≤ 6.0kPa
Sigh:	one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point
Pressure limit range:	0 ~ 6.0 kPa
Airway pressure alarm: Audible and visual and with yellow and red color indicating	Lower: 0.9 kPa ~ 5.4 kPa;   Upper: 0.5   kPa
	±0.2 kPa
Ventilation Volume alarm:	≥ 18L/ MIN
Power Supply Alarm	Ac/dc power supply are after failing to send out alarm immediately Alarm Time: keep >120s
The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.
Operating conditions
Ambient temperature:	10 ~ 40oC
Relative humidity:	no higher than 80 %
Atmospheric pressure:	860 hPa ~ 1060 hPa
Power requirement:	100-120 Vac, 50/60 Hz;
Attention: the AC power supply used for the ICU ventilator must be well   grounded.
Storage
Ambient temperature:	-15oC ~ +50oC
Relative humidity:	no higher than 95 %
Atmospheric pressure:	86 kPa ~ 106 kPa.
	It should be stored in a room without corrosive gas and well ventilated
Package
packaging box	comply with the requirement of GB/T 15464
	Between the packaging box and product, soft material with appropriate thickness provided to prevent loosening and mutual friction during transportation
	Moisture protection and rain protection to ensure that product is protected from natural damage.
Safty & Alarm
Gas source pressure	Immediate alarm; "high level alarm" indicator flickers raising an audible alarm.
Airway Pressure Alarm	The airway pressure exceeds 15hpa. The maximum delay is no longer than 17s. The "high level alarm" indicator flickers raising an audible alarm.
Tidal Volume Alarm	Lower than 50ml, The alarm will be raised after one breathing cycle.
Ventilation Volume Alarm	Lower: 0~12L/Min;   Up: 18L/ Min
Battery Voltage Alarm	It alrms when the battery voltage is lower than 10.5V.
Power On Self Test	Self test before working, assure it's working normally.
STANDARD CONFIGURATIONS
QTY	NAME
1 set	Main unit
1 set	Oxygen tube
2 set	Silicone Mask
1 pc	Power line
2 pcs	Threaded pipe
2 pcs	Standard Pipe
1 set	Oxygen Reducer
1 set	Humidifier
1 pc	Battery
1 set	flow sensor
2 pcs	A leather bag ( Blue)
1 set	Tools with the machine
1 set	User Manual (English Version)

We are a company aiming to make one stop shopping for our customers. We equiped hospital
operation room with many kind of items like operation table, orthopedic drill and saw, ECG,
defibrillator etc.
We listed some hospital operation room items basic items for your reference as below:

operation room	anesthesia machine
	ventilator
	operating lamp
	operation table
	Pendant
	medical drill and saw
	ECG
	patient monitor
	Defibrillator
	infusion pump
	Electrocoagulation
	oxygen generator
	electric suction device
	autoclave sterilizer